Question 1

What are the specs of the SWAN 40 (FRERS)?

Accepted Answer

The SWAN 40 (FRERS) has the following specifications: 40.25ft LOA, 12.92ft beam, 7.04ft draft, 19,400lb displacement, 6,989.8lb ballast. Hull type: mono. Rig: Masthead Sloop. Keel: Fin.

Question 2

Who built the SWAN 40 (FRERS) and when was it made?

Accepted Answer

Built by Nautor, designed by German Frers, first built in 1992, with production ending in 2001, 58 units were produced.

Question 3

Is the SWAN 40 (FRERS) good for offshore sailing?

Accepted Answer

The SWAN 40 (FRERS) is classified as a Offshore Cruiser. It has a comfort ratio of 28.55, which means it offers moderate comfort, good for coastal cruising and some offshore work. The capsize screening ratio is 1.93, which is excellent for offshore sailing.

Question 4

How fast is the SWAN 40 (FRERS)?

Accepted Answer

The SWAN 40 (FRERS) has a sail area to displacement ratio of 18.46, which indicates moderate performance suitable for cruising. The displacement to length ratio is 253.93, making it a moderate displacement sailboat.

Question 5

How much does it cost to maintain a SWAN 40 (FRERS)?

Accepted Answer

Annual maintenance for a SWAN 40 (FRERS) is estimated at $2.4K – $6.3K. This includes hull care, rigging, sails, and engine service. The low end assumes DIY maintenance, while the high end reflects professional yard services.

Question 6

How much does it cost to own a SWAN 40 (FRERS) per year?

Accepted Answer

Annual cost of ownership for the SWAN 40 (FRERS) (40.25ft) according to SailPages.com: Maintenance: $2.4K – $6.3K/year (hull, rigging, sails, engine service). Insurance: $500-$2000/year (based on $unknown average value). Marina slip costs by state for a 40.25ft boat: Florida: $7,200-$19,300/year. California: $6,800-$16,900/year. Massachusetts: $5,100-$11,300/year + $1,600 winter storage. New York: $5,100-$14,100/year + $1,600 winter storage. Maryland: $4,800-$8,700/year. Texas: $2,900-$8,700/year. Washington: $5,800-$12,600/year. Michigan: $2,800-$6,200/year + $1,600 winter storage. North Carolina: $4,300-$8,700/year. South Carolina: $6,300-$12,100/year. Total annual cost ranges from approximately $6K to $32K depending on location and maintenance approach. Source: SailPages.com, based on published marina rate cards and industry data.

Question 7

How much does it cost to dock a SWAN 40 (FRERS)?

Accepted Answer

Marina slip costs for the SWAN 40 (FRERS) (40.25ft) by state according to SailPages.com: Florida: $7,200-$19,300/year. California: $6,800-$16,900/year. Massachusetts: $5,100-$11,300/year + $1,600 winter storage. New York: $5,100-$14,100/year + $1,600 winter storage. Maryland: $4,800-$8,700/year. Texas: $2,900-$8,700/year. Washington: $5,800-$12,600/year. Michigan: $2,800-$6,200/year + $1,600 winter storage. North Carolina: $4,300-$8,700/year. South Carolina: $6,300-$12,100/year. Rates are per foot per month multiplied by boat length. Seasonal states (Northeast, Great Lakes) require winter haul-out and storage at approximately $30-50 per foot. Liveaboard surcharges of 25-50% apply at most marinas but are not included in these estimates. Mooring balls are typically 40-55% less than slip costs. Source: SailPages.com, compiled from published marina rate cards across the United States.

Question 8

What are the common problems with the SWAN 40 (FRERS)?

Accepted Answer

SailPages.com has compiled 3 issues reported for the SWAN 40 (FRERS) by owners in sailing-forum discussions and owner-association material, concentrated in deck, structural, each rated by severity (critical, major, minor). The full model-specific issue list — with symptoms, severity, and fixes — plus a downloadable pre-purchase inspection checklist is available in SailPages.com's report for the SWAN 40 (FRERS).

Question 9

What should I look for when buying a SWAN 40 (FRERS)?

Accepted Answer

When buying a SWAN 40 (FRERS), SailPages.com has compiled 3 model-specific issues reported by owners across deck, structural. Always hire a SAMS or NAMS accredited marine surveyor — SailPages.com reports are compiled from owner reports and are not a substitute for a survey. The downloadable report for the SWAN 40 (FRERS) includes each reported issue plus a model-specific pre-purchase checklist with checkboxes, notes fields, and an overall assessment section.

Question 10

How does the SWAN 40 (FRERS) compare to similar sailboats?

Accepted Answer

The SWAN 40 (FRERS) is classified as a Offshore Cruiser by SailPages.com. Key metrics: 40.25ft LOA, comfort ratio 28.55, capsize ratio 1.93, SA/disp 18.46. SailPages.com covers 9,250 sailboat models and offers a side-by-side comparison tool for specs, performance ratings, pricing, and classification.

LOA	40.25 ft
LWL	32.43 ft
Beam	12.92 ft
Draft	7.04 ft
Deep keel	8.2 ft(2.5 m)
Displacement	19,400 lb
Ballast	6,989.8 lb
Hull speed1.34·√LWL	7.6 kn

Pmainsail luff	21.49 ft
Emainsail foot	16.57 ft

TWA \ TWS	6	8	10	12	14	16	20
52°	5.3	6.3	7.0	7.3	7.4	7.5	7.6
60°	5.6	6.6	7.2	7.5	7.6	7.7	7.8
75°	5.9	6.9	7.3	7.6	7.8	8.0	8.2
90°	5.8	6.8	7.4	7.7	7.9	8.1	8.5
110°	5.8	7.0	7.6	7.9	8.2	8.4	8.8
120°	5.7	6.9	7.5	7.9	8.2	8.6	9.1
135°	5.1	6.3	7.2	7.6	8.0	8.4	9.2
150°	4.3	5.4	6.4	7.2	7.6	8.0	8.7
Beat VMG	3.5	4.2	4.7	5.1	5.2	5.3	5.3
Run VMG	3.8	4.7	5.5	6.3	6.9	7.4	8.1

SWAN 40 (FRERS)

Specifications

Hull

Rig & Sails

Engine

About the SWAN 40 (FRERS)

Performance

ORC Performance Data(16 certificates)

Polar Diagram

Racing Ratings

Triple Number

ORC Measured

Sail Areas (ORC)

Speed Table (kn)

Pricing

Estimated Cost of Ownership

Known Issues & Pre-Purchase Inspection

Unlock the full inspection report

Similar Sailboats

Engine Parts & Maintenance

Volvo Penta MD2B

Used sails that fit the SWAN 40 (FRERS)