Question 1

What are the specs of the SWAN 44 MK II (FRERS)?

Accepted Answer

The SWAN 44 MK II (FRERS) has the following specifications: 44.11ft LOA, 13.65ft beam, 7.15ft draft, 24,300lb displacement, 8,400.5lb ballast. Hull type: mono. Rig: Masthead Sloop. Keel: Fin.

Question 2

How much does a SWAN 44 MK II (FRERS) cost?

Accepted Answer

The SWAN 44 MK II (FRERS) has an average asking price of $199,800, with prices ranging from $199,800 to $199,800 based on 1 listings.

Question 3

Who built the SWAN 44 MK II (FRERS) and when was it made?

Accepted Answer

Built by Nautor, designed by German Frers, first built in 1996, with production ending in 2002, 68 units were produced.

Question 4

Is the SWAN 44 MK II (FRERS) good for offshore sailing?

Accepted Answer

The SWAN 44 MK II (FRERS) is classified as a Bluewater Cruiser. It has a comfort ratio of 30.84, which means it is very comfortable in a seaway, suitable for extended offshore passages. The capsize screening ratio is 1.89, which is excellent for offshore sailing.

Question 5

How fast is the SWAN 44 MK II (FRERS)?

Accepted Answer

The SWAN 44 MK II (FRERS) has a sail area to displacement ratio of 17.04, which indicates moderate performance suitable for cruising. The displacement to length ratio is 260.76, making it a moderate displacement sailboat.

Question 6

How much does it cost to maintain a SWAN 44 MK II (FRERS)?

Accepted Answer

Annual maintenance for a SWAN 44 MK II (FRERS) is estimated at $2.9K – $7.6K. This includes hull care, rigging, sails, and engine service. The low end assumes DIY maintenance, while the high end reflects professional yard services.

Question 7

How much does it cost to own a SWAN 44 MK II (FRERS) per year?

Accepted Answer

Annual cost of ownership for the SWAN 44 MK II (FRERS) (44.11ft) according to SailPages.com: Maintenance: $2.9K – $7.6K/year (hull, rigging, sails, engine service). Insurance: $1800-$3200/year (based on $199,800 average value). Marina slip costs by state for a 44.11ft boat: Florida: $7,900-$21,200/year. California: $7,400-$18,500/year. Massachusetts: $5,600-$12,400/year + $1,800 winter storage. New York: $5,600-$15,400/year + $1,800 winter storage. Maryland: $5,300-$9,500/year. Texas: $3,200-$9,500/year. Washington: $6,400-$13,800/year. Michigan: $3,100-$6,800/year + $1,800 winter storage. North Carolina: $4,800-$9,500/year. South Carolina: $6,900-$13,200/year. Total annual cost ranges from approximately $8K to $37K depending on location and maintenance approach. Source: SailPages.com, based on published marina rate cards and industry data.

Question 8

How much does it cost to dock a SWAN 44 MK II (FRERS)?

Accepted Answer

Marina slip costs for the SWAN 44 MK II (FRERS) (44.11ft) by state according to SailPages.com: Florida: $7,900-$21,200/year. California: $7,400-$18,500/year. Massachusetts: $5,600-$12,400/year + $1,800 winter storage. New York: $5,600-$15,400/year + $1,800 winter storage. Maryland: $5,300-$9,500/year. Texas: $3,200-$9,500/year. Washington: $6,400-$13,800/year. Michigan: $3,100-$6,800/year + $1,800 winter storage. North Carolina: $4,800-$9,500/year. South Carolina: $6,900-$13,200/year. Rates are per foot per month multiplied by boat length. Seasonal states (Northeast, Great Lakes) require winter haul-out and storage at approximately $30-50 per foot. Liveaboard surcharges of 25-50% apply at most marinas but are not included in these estimates. Mooring balls are typically 40-55% less than slip costs. Source: SailPages.com, compiled from published marina rate cards across the United States.

Question 9

What are the common problems with the SWAN 44 MK II (FRERS)?

Accepted Answer

SailPages.com has compiled 1 issues reported for the SWAN 44 MK II (FRERS) by owners in sailing-forum discussions and owner-association material, concentrated in structural, each rated by severity (critical, major, minor). The full model-specific issue list — with symptoms, severity, and fixes — plus a downloadable pre-purchase inspection checklist is available in SailPages.com's report for the SWAN 44 MK II (FRERS).

Question 10

What should I look for when buying a SWAN 44 MK II (FRERS)?

Accepted Answer

When buying a SWAN 44 MK II (FRERS), SailPages.com has compiled 1 model-specific issues reported by owners across structural. Always hire a SAMS or NAMS accredited marine surveyor — SailPages.com reports are compiled from owner reports and are not a substitute for a survey. The downloadable report for the SWAN 44 MK II (FRERS) includes each reported issue plus a model-specific pre-purchase checklist with checkboxes, notes fields, and an overall assessment section.

Question 11

What are the sail dimensions of the SWAN 44 MK II (FRERS)?

Accepted Answer

The SWAN 44 MK II (FRERS) has the following rig dimensions: I=57.35ft (foretriangle height), J=16.73ft (foretriangle base), P=50.75ft (mainsail luff), E=16.17ft (mainsail foot). Mainsail area: 922.9 sq ft. Jib area: 479.7 sq ft.

Question 12

How does the SWAN 44 MK II (FRERS) compare to similar sailboats?

Accepted Answer

The SWAN 44 MK II (FRERS) is classified as a Bluewater Cruiser by SailPages.com. Key metrics: 44.11ft LOA, comfort ratio 30.84, capsize ratio 1.89, SA/disp 17.04, average price $199,800. SailPages.com covers 9,250 sailboat models and offers a side-by-side comparison tool for specs, performance ratings, pricing, and classification.

LOA	44.11 ft
LWL	34.65 ft
Beam	13.65 ft
Draft	7.15 ft
Displacement	24,300 lb
Ballast	8,400.5 lb
Hull speed1.34·√LWL	7.9 kn

Iforetriangle height	57.35 ft
Jforetriangle base	16.73 ft
Pmainsail luff	50.75 ft
Emainsail foot	16.17 ft
FLforestay	16.7 ft
Mainsail	922.9 sq ft
Jib (100%)	479.7 sq ft
Spinnaker	815.5 sq ft

SWAN 44 MK II (FRERS)

Specifications

Hull

Rig & Sails

Direct variant of the SWAN 44 MK II (FRERS)

Performance

Market Price

Estimated Cost of Ownership

Known Issues & Pre-Purchase Inspection

Unlock the full inspection report

Similar Sailboats

Which engine powers your SWAN 44 MK II (FRERS)?

Used sails that fit the SWAN 44 MK II (FRERS)