Question 1

What are the specs of the SPENCER 44?

Accepted Answer

The SPENCER 44 has the following specifications: 42ft LOA, 11.5ft beam, 6.5ft draft, 24,000lb displacement, 7,999.2lb ballast. Hull type: mono. Rig: Masthead Sloop. Keel: Full/Long.

Question 2

Who built the SPENCER 44 and when was it made?

Accepted Answer

Built by Spencer Boats Ltd., designed by John Brandlmayr, first built in 1968, 21 units were produced.

Question 3

Is the SPENCER 44 good for offshore sailing?

Accepted Answer

The SPENCER 44 is classified as a Bluewater Cruiser. It has a comfort ratio of 40.57, which means it is very comfortable in a seaway, suitable for extended offshore passages. The capsize screening ratio is 1.6, which is excellent for offshore sailing.

Question 4

How fast is the SPENCER 44?

Accepted Answer

The SPENCER 44 has a sail area to displacement ratio of 15.97, which indicates a more conservative sail plan focused on comfort over speed. The displacement to length ratio is 312.11, making it a heavy displacement sailboat.

Question 5

How much does it cost to maintain a SPENCER 44?

Accepted Answer

Annual maintenance for a SPENCER 44 is estimated at $3.2K – $8.4K. This includes hull care, rigging, sails, and engine service. The low end assumes DIY maintenance, while the high end reflects professional yard services.

Question 6

How much does it cost to own a SPENCER 44 per year?

Accepted Answer

Annual cost of ownership for the SPENCER 44 (42ft) according to SailPages.com: Maintenance: $3.2K – $8.4K/year (hull, rigging, sails, engine service). Insurance: $500-$2000/year (based on $unknown average value). Marina slip costs by state for a 42ft boat: Florida: $7,600-$20,200/year. California: $7,100-$17,600/year. Massachusetts: $5,300-$11,800/year + $1,700 winter storage. New York: $5,300-$14,700/year + $1,700 winter storage. Maryland: $5,000-$9,100/year. Texas: $3,000-$9,100/year. Washington: $6,000-$13,100/year. Michigan: $2,900-$6,500/year + $1,700 winter storage. North Carolina: $4,500-$9,100/year. South Carolina: $6,600-$12,600/year. Total annual cost ranges from approximately $7K to $36K depending on location and maintenance approach. Source: SailPages.com, based on published marina rate cards and industry data.

Question 7

How much does it cost to dock a SPENCER 44?

Accepted Answer

Marina slip costs for the SPENCER 44 (42ft) by state according to SailPages.com: Florida: $7,600-$20,200/year. California: $7,100-$17,600/year. Massachusetts: $5,300-$11,800/year + $1,700 winter storage. New York: $5,300-$14,700/year + $1,700 winter storage. Maryland: $5,000-$9,100/year. Texas: $3,000-$9,100/year. Washington: $6,000-$13,100/year. Michigan: $2,900-$6,500/year + $1,700 winter storage. North Carolina: $4,500-$9,100/year. South Carolina: $6,600-$12,600/year. Rates are per foot per month multiplied by boat length. Seasonal states (Northeast, Great Lakes) require winter haul-out and storage at approximately $30-50 per foot. Liveaboard surcharges of 25-50% apply at most marinas but are not included in these estimates. Mooring balls are typically 40-55% less than slip costs. Source: SailPages.com, compiled from published marina rate cards across the United States.

Question 8

What are the common problems with the SPENCER 44?

Accepted Answer

SailPages.com has compiled 1 issues reported for the SPENCER 44 by owners in sailing-forum discussions and owner-association material, concentrated in hull, each rated by severity (critical, major, minor). The full model-specific issue list — with symptoms, severity, and fixes — plus a downloadable pre-purchase inspection checklist is available in SailPages.com's report for the SPENCER 44.

Question 9

What should I look for when buying a SPENCER 44?

Accepted Answer

When buying a SPENCER 44, SailPages.com has compiled 1 model-specific issues reported by owners across hull. Always hire a SAMS or NAMS accredited marine surveyor — SailPages.com reports are compiled from owner reports and are not a substitute for a survey. The downloadable report for the SPENCER 44 includes each reported issue plus a model-specific pre-purchase checklist with checkboxes, notes fields, and an overall assessment section.

Question 10

What are the sail dimensions of the SPENCER 44?

Accepted Answer

The SPENCER 44 has the following rig dimensions: I=50.75ft (foretriangle height), J=17.33ft (foretriangle base), P=40.8ft (mainsail luff), E=19ft (mainsail foot). Mainsail area: 858.4 sq ft. Jib area: 439.8 sq ft.

Question 11

How does the SPENCER 44 compare to similar sailboats?

Accepted Answer

The SPENCER 44 is classified as a Bluewater Cruiser by SailPages.com. Key metrics: 42ft LOA, comfort ratio 40.57, capsize ratio 1.6, SA/disp 15.97. SailPages.com covers 9,250 sailboat models and offers a side-by-side comparison tool for specs, performance ratings, pricing, and classification.

LOA	42 ft
LWL	32.5 ft
Beam	11.5 ft
Draft	6.5 ft
Displacement	24,000 lb
Ballast	7,999.2 lb
Hull speed1.34·√LWL	7.6 kn

Iforetriangle height	50.75 ft
Jforetriangle base	17.33 ft
Pmainsail luff	40.8 ft
Emainsail foot	19 ft
FLforestay	17.3 ft
Mainsail	858.4 sq ft
Jib (100%)	439.8 sq ft
Spinnaker	747.6 sq ft

SPENCER 44

Specifications

Hull

Rig & Sails

About the SPENCER 44

Performance

Pricing

Estimated Cost of Ownership

Known Issues & Pre-Purchase Inspection

Unlock the full inspection report

Similar Sailboats

Which engine powers your SPENCER 44?

Used sails that fit the SPENCER 44