Question 1

What are the specs of the SCEPTRE 36?

Accepted Answer

The SCEPTRE 36 has the following specifications: 35.5ft LOA, 11.42ft beam, 6ft draft, 12,000lb displacement, 5,499.6lb ballast. Hull type: mono. Rig: Masthead Sloop. Keel: Fin.

Question 2

How much does a SCEPTRE 36 cost?

Accepted Answer

The SCEPTRE 36 has an average asking price of $18,000, with prices ranging from $18,000 to $18,000 based on 1 listings.

Question 3

Who built the SCEPTRE 36 and when was it made?

Accepted Answer

Built by Sceptre Yachts Ltd. (CAN), designed by Hein Driehuyzen, first built in 1978, with production ending in 1984, 36 units were produced.

Question 4

Is the SCEPTRE 36 good for offshore sailing?

Accepted Answer

The SCEPTRE 36 is classified as a Racer/Cruiser. It has a comfort ratio of 23.34, which means it offers moderate comfort, good for coastal cruising and some offshore work. The capsize screening ratio is 2, which is acceptable for offshore use.

Question 5

How fast is the SCEPTRE 36?

Accepted Answer

The SCEPTRE 36 has a sail area to displacement ratio of 18.26, which indicates moderate performance suitable for cruising. The displacement to length ratio is 217.85, making it a moderate displacement sailboat.

Question 6

How much does it cost to maintain a SCEPTRE 36?

Accepted Answer

Annual maintenance for a SCEPTRE 36 is estimated at $2.1K – $5.5K. This includes hull care, rigging, sails, and engine service. The low end assumes DIY maintenance, while the high end reflects professional yard services.

Question 7

How much does it cost to own a SCEPTRE 36 per year?

Accepted Answer

Annual cost of ownership for the SCEPTRE 36 (35.5ft) according to SailPages.com: Maintenance: $2.1K – $5.5K/year (hull, rigging, sails, engine service). Insurance: $150-$300/year (based on $18,000 average value). Marina slip costs by state for a 35.5ft boat: Florida: $6,400-$17,000/year. California: $6,000-$14,900/year. Massachusetts: $4,500-$9,900/year + $1,400 winter storage. New York: $4,500-$12,400/year + $1,400 winter storage. Maryland: $4,300-$7,700/year. Texas: $2,600-$7,700/year. Washington: $5,100-$11,100/year. Michigan: $2,500-$5,500/year + $1,400 winter storage. North Carolina: $3,800-$7,700/year. South Carolina: $5,500-$10,700/year. Total annual cost ranges from approximately $5K to $27K depending on location and maintenance approach. Source: SailPages.com, based on published marina rate cards and industry data.

Question 8

How much does it cost to dock a SCEPTRE 36?

Accepted Answer

Marina slip costs for the SCEPTRE 36 (35.5ft) by state according to SailPages.com: Florida: $6,400-$17,000/year. California: $6,000-$14,900/year. Massachusetts: $4,500-$9,900/year + $1,400 winter storage. New York: $4,500-$12,400/year + $1,400 winter storage. Maryland: $4,300-$7,700/year. Texas: $2,600-$7,700/year. Washington: $5,100-$11,100/year. Michigan: $2,500-$5,500/year + $1,400 winter storage. North Carolina: $3,800-$7,700/year. South Carolina: $5,500-$10,700/year. Rates are per foot per month multiplied by boat length. Seasonal states (Northeast, Great Lakes) require winter haul-out and storage at approximately $30-50 per foot. Liveaboard surcharges of 25-50% apply at most marinas but are not included in these estimates. Mooring balls are typically 40-55% less than slip costs. Source: SailPages.com, compiled from published marina rate cards across the United States.

Question 9

What are the common problems with the SCEPTRE 36?

Accepted Answer

SailPages.com has compiled 3 issues reported for the SCEPTRE 36 by owners in sailing-forum discussions and owner-association material, concentrated in hull, interior, each rated by severity (critical, major, minor). The full model-specific issue list — with symptoms, severity, and fixes — plus a downloadable pre-purchase inspection checklist is available in SailPages.com's report for the SCEPTRE 36.

Question 10

What should I look for when buying a SCEPTRE 36?

Accepted Answer

When buying a SCEPTRE 36, SailPages.com has compiled 3 model-specific issues reported by owners across hull, interior. Always hire a SAMS or NAMS accredited marine surveyor — SailPages.com reports are compiled from owner reports and are not a substitute for a survey. The downloadable report for the SCEPTRE 36 includes each reported issue plus a model-specific pre-purchase checklist with checkboxes, notes fields, and an overall assessment section.

Question 11

What are the sail dimensions of the SCEPTRE 36?

Accepted Answer

The SCEPTRE 36 has the following rig dimensions: I=47ft (foretriangle height), J=15ft (foretriangle base), P=41.5ft (mainsail luff), E=11.75ft (mainsail foot). Mainsail area: 615.8 sq ft. Jib area: 352.5 sq ft.

Question 12

How does the SCEPTRE 36 compare to similar sailboats?

Accepted Answer

The SCEPTRE 36 is classified as a Racer/Cruiser by SailPages.com. Key metrics: 35.5ft LOA, comfort ratio 23.34, capsize ratio 2, SA/disp 18.26, average price $18,000. SailPages.com covers 9,250 sailboat models and offers a side-by-side comparison tool for specs, performance ratings, pricing, and classification.

LOA	35.5 ft
LWL	29.08 ft
Beam	11.42 ft
Draft	6 ft
Displacement	12,000 lb
Ballast	5,499.6 lb
Hull speed1.34·√LWL	7.2 kn

Iforetriangle height	47 ft
Jforetriangle base	15 ft
Pmainsail luff	41.5 ft
Emainsail foot	11.75 ft
FLforestay	15 ft
Mainsail	615.8 sq ft
Jib (100%)	352.5 sq ft
Spinnaker	599.3 sq ft

SCEPTRE 36

Specifications

Hull

Rig & Sails

About the SCEPTRE 36

Performance

Market Price

Estimated Cost of Ownership

Known Issues & Pre-Purchase Inspection

Unlock the full inspection report

Similar Sailboats

Which engine powers your SCEPTRE 36?

Used sails that fit the SCEPTRE 36