SCAMPI 30-2
Specifications
Hull
| LOA | 29.75 ft |
| LWL | 23 ft |
| Beam | 9.84 ft |
| Draft | 5.41 ft |
| Displacement | 7,275 lb |
| Ballast | 2,778.3 lb |
| Hull speed1.34·√LWL | 6.4 kn |
Rig & Sails
| Iforetriangle height | 35.1 ft |
| Jforetriangle base | 10.8 ft |
| Pmainsail luff | 29.8 ft |
| Emainsail foot | 9.1 ft |
| FLforestay | 10.8 ft |
| Mainsail | 336 sq ft |
| Jib (100%) | 189.5 sq ft |
| Spinnaker | 322.2 sq ft |
About the SCAMPI 30-2
The SCAMPI was Peter Norlins first yacht design. It's hard to think of a case where the first effort of any designer achieved similar success. The prototype, (by convention, referred to as the MKI,) trounced the competition at the half ton cup of 1969 (sailed under the RORC handicap rule). After going into production, this second. slightly modified version came back the following year to win first and second in this same event though, this time, under the newly adopted IOR rule. It is thought that at least 50 of this version (MkII) were built. A Mark III version, which followed, was built in far greater numbers.
Performance
Estimated Value
Limited DataEstimated Cost of Ownership
Based on 29.75ft LOA. Actual costs vary by condition, usage, and local rates.
Known Issues & Pre-Purchase Inspection
We don't have enough data on the SCAMPI 30-2yet to publish model-specific findings we'd stand behind — but here's a free general inspection checklist, built from our research into what actually goes wrong on boats of this kind.
Drawn from 7,029 documented issues across 2,391 models, ordered so the areas that most often turn up problems come first.
Own a SCAMPI 30-2? Reports from owners are what turn this into a model-specific checklist — and they're the reason the boats above it have one.
Similar Sailboats
Which engine powers your SCAMPI 30-2?
We haven't confirmed the engine for this model yet. If you own or know one, tell us — as owners report in, we build an accurate picture over time.
Already know your engine? Search all engines → to find its exact parts.
Used sails that fit the SCAMPI 30-2
Checking eBay for sails sized to this boat's rig…